Software License
Overview
Easson2D software licensing varies depending on the machine series. Some series can run directly without a dongle, while others require a dongle to be connected before the software can be used.
Licensing Methods
Easson2D software licensing is divided into two categories based on the machine series:
| Machine Series | Licensing Method | Description |
|---|---|---|
| EV Semi-Automatic Series | No dongle required | Software can run immediately after installation |
| C Manual Series | No dongle required | Software can run immediately after installation |
| SP Fully Automatic Series | Dongle required | Dongle must be inserted into a USB port before launching the software |
Important
When using the SP Fully Automatic Series, ensure the dongle is properly inserted into a USB port on the computer. The software will not start if the dongle is not detected.
FAQ
Software Still Won't Start After Inserting the Dongle
- Check whether the dongle's indicator light is on
- Try a different USB port on the computer
- Verify that the dongle driver is installed
- If the issue persists, contact Easson technical support
Dongle Lost or Damaged
If the dongle is lost or damaged, please contact Easson Measurement promptly for a replacement.
Contact Information
For software licensing inquiries, please contact Zhuhai Easson Measurement Technology Co., Ltd.:
| Contact Method | Details |
|---|---|
| 1789537552 | |
| yabdc@126.com | |
| Phone | 13709682682 (Manager Yang) |
| Address | No. 937 Yuannan Road, Sanzao Town, Zhuhai, Guangdong, China |